Questions? Call Us: (336) 643-2599

Grip Master Vise

Note: The Receiver Jaws and "V" Jaws shown in the picture to the left are sold separately.  See below to order.
 
"Jaws" Grip Master Bench Vise "Specifically designed for the diving repair bench." The vise is a Heinrich® Grip Master Vise that features a cam operated clamping device that was originally patented by Heinrich in 1946. This lever operated mechanism is time "tested tough" and produces an adjustable holding pressure of 400-1100 lbs. A simple push or pull on the center bar knob slides the movable jaw in position, and an easy press on the locking lever cams the jaw forward to securely hold the part. The total amount of clamping force is determined by the force applied to the locking lever. There are several reasons why this type of vise is the best for the diving repair bench. First, the clamping force is easy to control which helps to eliminate overtightening delicate parts. Second, the entire clamping and unclamping process is fast and accommodates a variety of different size parts quickly and conveniently. Third, the overall design of the vise is compatible to a variety of special soft jaws and fixtures that can be retro fitted in the vise for special clamping problems. The frame of the Grip Master Vise is made from fine grain cast iron and all bars and locking components are hardened and ground. The total weight of the vise is 20 lbs. and it is built for years of trouble free service. The soft jaw system (sold seperately) for this vise is a Scuba Tools exclusive. The jaws are designed to handle 90% of all clamping problems that cross the diving repair bench. They consists of two sets of jaws that work together. Both sets are made of alloy aluminum that have been vibratory finished to eliminate all sharp corners. The "receiver jaws" are bolted to the vise and function as flat jaws. They are used to clamp parts that have at least two parallel surfaces. The "V Jaws" are designed to be "quick change" and are pinned to the receiver jaws with a steel dowel pin. The "V Jaws" are used for clamping round or irregular objects such as first stages. Tips For Using This Vise System The primary problem with any vise used to clamp delicate parts is "overtightening". The appropriate tension is critical to reducing the probability of damaging parts or scratching chrome plated surfaces. This vise gives the operator the maximum "touch" for controlling the clamping pressure. The actual security of the captured part is more relative to the shape of the jaws, and how they conform to the part, than the actual clamping force. If the part fits securely in the jaws, the clamping force can be reduced to a minimum. As a general rule, first stages come in two basic shapes. This configuration is primarily based on the position of the yoke (i.e. in-line yoke and side yoke). The roundness of the body will depend on the fabricating process used to manufacture the part. Machined bodies will be perfectly round, and forged bodies may have irregularities in regard to parallel surfaces. The side mounted yoke first stage presents the least problem in regard to clamping. The "L" shape and orientation of the yoke nut allows this type of first stage to be securely captured in the vise with minimal clamping force The in-line yoke first stage is a bit more difficult to clamp because it will tend to rotate in the "V" jaw when force is applied to remove the yoke nut. The best procedure is to thread a First Stage Handle into one of the LP or HP ports to form a stiff leg that can rest against the horizontal "V" jaw. This restricts the rotational movement to the point where the First Stage Handle contacts the "V" jaw in both tightening and loosening directions.
Making selections in the following sections may change the final product price.
Jaws for Vise
Custom aluminum receiver jaws to replace the steel jaws that come with the vise.
Designed to work with the custom receiver jaws. This jaw set will not work with the steel receiver jaws that come with the vise.

Summary

  • Receiver Jaws
  • V-Jaws
$422.00
$474.75
Loading...