XS Scuba Poppet Align/Preset Tool

The XS Scuba Poppet Align/Preset Tool is designed as a dual function tool. One end is used to preset the depth of the orifice in the air barrel, and the opposite end is used to control the poppet orientation when it is installed into the air barrel. The orifice is installed and preset to the approximate depth first. After inserting the orifice into the air barrel, engage the drive bit with the orifice slot and thread the orifice into the air barrel as far as it will go. This will position the orifice at a depth of .480” - .490”. With the orifice positioned, turn the tool around and insert the poppet into the notched end of the tool. Orientate the poppet and tool, as shown in the illustration to the right, and slide it into the air barrel as far as it will go. Install the lever into the air barrel. Press inward on the lever tabs to hold the poppet in place while the tool is removed. Shipped with complete instructions.