Parker 526-BA HP Hose

Scuba Tools has the Parker® PFD hydraulic crimping system designed specifically for permanently installing Parker® hose end fittings. At the present time, we are stocking 1/4" ID x 1/2" OD hose with a choice of 1/4" JIC (37 degree) swivel or 1/4" NPT fixed end fittings. The fittings are steel with a gold zinc phosphate coating. Custom HP hose assemblies can be constructed ranging from 6" to 500'. Not for 100% oxygen use. For ordering information, see below. The Parker® 526-BA high pressure hose that maintains the breathing air quality standards as described by CGA G-7-1997 Grade E. This flexible, nylon reinforced, themoplastic hose is suitable for SCUBA air station and repair bench applications. The Parker® 526-BA hose is pressure rated for 6,000 psi working pressure with a burst pressure of 24,000 psi within a maximum operating temperature of 180 degrees F. The hose construction consists of a seamless thermoplastic inner tube reinforced by two layers of high strength synthetic fiber and a weather resistant thermoplastic outer cover. The outer cover is pinpricked for pneumatic service and is gray in color with white print identification. Ordering Hose Assemblies: To order HP & LP hose assemblies, use the part number listed below to indicate the type of hose being ordered. In addition to the type of hose, be sure to include the length of the hose and the two end fitting part numbers required to complete the assembly. Hose end fitting part numbers are listed below.

The cost of a hose assembly can be estimated by multiplying the length of the hose times the price per foot (i.e. 5 feet X $5.00 = $25.00 + $10.00 = Total of $35.00)
The $10.00 charge includes two hose end fittings.